Should You Drip Faucets to Prevent Frozen Pipes?
Last updated October 31, 2026
The short answer
How a Drip Helps
Water moving through a pipe is less likely to freeze than still water. A slow drip keeps a gentle flow going, which reduces the chance of ice blocking the line. Even a thin stream can make a difference, especially in unheated areas like crawl spaces or exterior walls.
The drip also relieves pressure that builds when ice starts to form. That pressure can crack a pipe even if the ice does not fully block it. A small drip at each faucet on an exterior wall is often enough. You do not need a fast stream; a trickle is fine.
When to Start Dripping
Start dripping when the temperature is forecast to drop near or below freezing, especially if the cold lasts for several hours. That might happen a few nights a year in this area. Watch the local forecast and act before the coldest part of the night.
Keep the drip going until the outdoor temperature climbs back above freezing. If you lose power, the drip stops, so have a backup plan like shutting off the water and draining pipes. You can also open cabinet doors under sinks to let warm air reach the pipes.
- Drip both hot and cold faucets, but cold is the priority
- Open cabinet doors in kitchens and bathrooms
- Seal gaps around pipes and doors with weatherstripping
- Keep the thermostat at a consistent setting day and night
- Know where your main shutoff valve is located
- Insulate pipes in unheated areas if you can
Other Steps to Prevent Freezing
Dripping alone may not protect every pipe. Add insulation to exposed pipes in attics, garages, and crawl spaces. Use foam pipe covers or wrap towels around them for a temporary fix. Disconnect garden hoses and drain outdoor spigots before a freeze.
If you leave home during a cold snap, set your thermostat no lower than 55 degrees. That keeps interior walls warm enough to slow freezing. You can also shut off the water and drain the system if you will be away for a long time. Ask a plumber for help if you are unsure.
What to Do If a Pipe Freezes
If a faucet produces no water or a trickle, the pipe may be frozen. Do not use a torch or open flame to thaw it; that can start a fire. Use a hair dryer, space heater, or warm towels on the pipe, starting from the faucet end. Keep the faucet open so water can flow once the ice melts.
If a pipe bursts, shut off the main water valve right away. Then call local water damage pros to handle the extraction and drying. Water damage can spread quickly into walls and floors, so acting fast helps limit the mess. See a doctor if you feel unwell from any mold or mildew that appears later.
When to Call for Help
You can handle a simple frozen pipe yourself, but a burst pipe or extensive water damage needs professional help. Local water damage pros have the equipment to extract water, dry structures, and check for hidden moisture. They can also help with drywall and flooring repairs after the water is gone.
If you suspect a leak behind a wall, a plumber can locate and fix the source. For water damage cleanup, look into services like emergency water extraction and structural drying. Policies vary, and your insurer decides what is covered. Check your policy and ask your insurance company about your situation.
Talk to someone now
Water keeps spreading into floors and walls, so it is worth acting early. Calls are answered 24/7.
Call Now (281) 688-9975Frequently asked questions
How long should I drip the faucet?
Keep the drip going until the outdoor temperature stays above freezing for at least a few hours. If the forecast shows a cold night, start in the evening and continue through the morning. Stopping too early can leave pipes vulnerable.
Does dripping hot water help more than cold?
Cold water is usually enough, but a mix of both can help if the pipe is in a very cold spot. Hot water lines can freeze too, so it is wise to drip both. The key is to keep water moving through all pipes that are exposed to cold.
What if my pipes freeze anyway?
Shut off the main water valve immediately and open the faucet to relieve pressure. Thaw the pipe slowly with a hair dryer or warm towels. If the pipe bursts or you see water damage, contact the pros and your insurance company. Do not use open flames.
More questions and answers
- Frozen Pipes: What Causes Them and How to Prevent It
- How to Prevent Frozen Pipes: A Complete Guide
- Frozen Pipes in Commercial Buildings: Prevention Plan
- How to Tell If Your Pipes Are Frozen Right Now
- How to Safely Thaw Frozen Pipes Without Damage
- Frozen Pipes in Vacant Homes: A Costly Mistake
- All articles