Frozen Pipes in Vacant Homes: A Costly Mistake
Last updated October 31, 2026
The short answer
Why Vacant Homes Are at Risk
When a home sits empty, no one notices a slow temperature drop or a trickle of water. Pipes freeze when the surrounding air gets cold enough, and ice expands inside the metal or plastic. That expansion can crack a pipe, and when the ice thaws, water pours out for hours or days.
In a vacant home, that water keeps flowing until someone finds it. By then, drywall, flooring, and personal belongings may be soaked. The longer the water sits, the more damage it causes, including mold growth and structural weakening.
Prevent Freezing Before It Starts
If you own a vacant home in a cold spell, take steps before the temperature drops. Shut off the main water supply and drain every faucet, toilet, and appliance. Open cabinet doors under sinks so warm air reaches the pipes, and keep the thermostat set to at least 55 degrees Fahrenheit.
- Shut off the main water valve and drain all faucets.
- Flush toilets and pour antifreeze into the bowls.
- Set the thermostat to at least 55 degrees.
- Open cabinet doors to let warm air reach pipes.
- Insulate exposed pipes with foam or heat tape.
- Have someone inspect the home daily during a freeze.
What Happens When a Pipe Bursts
A burst pipe can release hundreds of gallons of water in a single day. In a vacant home, that water spreads through walls, ceilings, and floors. It can ruin drywall, warp wood, and soak insulation. The longer it sits, the more expensive the repair.
Water also creates the perfect environment for mold. Mold can start growing within 24 to 48 hours on wet surfaces. Once it takes hold, it can spread quickly and affect indoor air quality. That means the cleanup involves more than just drying things out.
Steps to Take After a Freeze
If you find a frozen pipe, do not try to thaw it with a torch or open flame. That can start a fire or crack the pipe further. Instead, turn off the water supply and use a hair dryer or space heater to warm the pipe slowly. If the pipe has already burst, shut off the main valve immediately.
Once the water is off, remove as much standing water as you can. Use towels, a wet-dry vacuum, or a pump. The faster you extract the water, the less damage it causes. Then open windows and run fans to start the drying process.
If the damage is extensive, you might need professional help. Water damage pros can extract water, dry out structures, and prevent mold. They use specialized equipment to reach moisture in walls and under floors that you cannot see.
Know Your Insurance Options
Homeowners insurance sometimes covers burst pipes, but not always. Policies vary, and your insurer decides what is covered. Some policies exclude damage from freezing if the home was vacant for more than a few days. Others require proof that you took reasonable steps to prevent freezing.
Check your policy before a freeze happens. Look for clauses about vacancy and freezing. If you are unsure, ask your insurance agent. Keep records of your prevention steps, such as photos of insulated pipes or a note that you drained the system. That documentation can help if you need to file a claim.
Talk to someone now
Phones are answered 24/7 for Missouri City and nearby communities.
Call Now (281) 688-9975Frequently asked questions
How cold does it have to be for pipes to freeze?
Pipes can freeze when the outdoor temperature drops to around 20 degrees Fahrenheit or below, especially if the home is unheated. Wind and poor insulation make it happen faster. Even a few hours of extreme cold can cause ice to form inside a pipe.
Can I just leave the heat on low and go?
Leaving the heat on low, around 55 degrees, helps but does not ensure pipes stay safe. If the power goes out or the heater fails, pipes can still freeze. You also need to drain the system or keep a trickle of water running. A vacant home needs more than just a low thermostat.
What should I do if I find a burst pipe in my vacant home?
Shut off the main water valve immediately to stop the flow. Then remove standing water with a wet-dry vacuum or pump. Open windows and run fans to dry the area. If the damage is severe, contact local water damage pros for extraction and drying.
More questions and answers
- How to Prevent Frozen Pipes: A Complete Guide
- How to Safely Thaw Frozen Pipes Without Damage
- Frozen Pipes: What Causes Them and How to Prevent It
- Should You Drip Faucets to Prevent Frozen Pipes?
- How to Tell If Your Pipes Are Frozen Right Now
- Frozen Pipes in Commercial Buildings: Prevention Plan
- All articles