Phone answered 24/7 · Missouri City, TX and nearby communities

Call 24/7: (281) 688-9975
Brays Bayou Water ResponseWater Damage Help · Missouri City, TX

Sump Pump Failed? What to Do When It Stops Working

Last updated October 31, 2026

The short answer

Check Power and Float Switch

Start by checking the power supply. Make sure the pump is plugged in and the circuit breaker hasn't tripped. A tripped breaker is a common cause, so reset it if needed. Also, inspect the cord for damage, but do not touch it if it's wet or if your hands are damp.

Next, look at the float switch. This small device tells the pump when to turn on and off. If it's stuck in the up or down position, the pump won't work. Gently move the float to see if it frees up. If the pump runs, the switch was the issue.

  • Unplug the pump before touching it
  • Check the outlet with a lamp or phone charger
  • Look for kinks in the discharge hose
  • Listen for a humming sound, which means power is flowing
  • If the pump hums but doesn't move water, it may be clogged

Clear Clogs and Debris

A clogged pump is another frequent problem. Sump pits collect dirt, leaves, and small objects that can jam the impeller. Turn off the pump and unplug it. Reach into the pit, wearing gloves, and remove any visible debris. Check the intake screen and clean it with a brush or water.

If the pump still won't run, the impeller might be broken. You can often replace the impeller yourself if you have the manual. Otherwise, a plumber or sump pump repair service can handle it. In the meantime, you need to manage the water level to avoid flooding.

Manage Water Manually

While the pump is down, you need to keep water from rising. Use a bucket, mop, or wet/dry vacuum to remove water from the pit. If the water is already spreading, move furniture and valuables to higher ground. You can also use towels to soak up water from floors.

If the water level is rising fast, consider buying a temporary submersible pump from a hardware store. It can plug into the same outlet and pump water out. This gives you time to fix the main pump or wait for a professional. Keep the area ventilated to speed drying.

  • Use a wet/dry vacuum for small amounts
  • Rent a submersible pump for larger volumes
  • Turn off power to the area if water is near outlets
  • Move rugs and boxes away from the pit
  • Open windows or use a fan to dry the space
  • Wear rubber boots and gloves for safety

Know When to Call the Pros

If you can't fix the pump quickly or if water damage is already occurring, call the pros. They have the tools to extract standing water and dry out your home. They can also inspect for hidden moisture in walls and floors, which can lead to mold.

For pump replacement or major repairs, a plumber or sump pump specialist is the right choice. They can install a new pump correctly and ensure it meets your home's needs. If water has soaked into drywall or flooring, the pros can handle the cleanup and restoration.

Policies vary, and your insurer decides what is covered. Check your policy to see if sump pump failure is included. Some policies cover water damage from sewer backups, but not from mechanical failure. Document everything with photos and keep receipts for any temporary equipment.

Prevent Future Failures

Once your pump is working again, take steps to avoid a repeat. Test your sump pump every few months by pouring water into the pit and watching it cycle. Clean the pit and pump intake regularly to prevent clogs. Also, check the discharge line for blockages.

Need help right now?

Phones are answered 24/7 for Missouri City and nearby communities.

Call Now (281) 688-9975

Frequently asked questions

How long can a sump pump go without working?

It depends on how fast water enters the pit. In a heavy rain, water can rise quickly. Even a few hours can lead to flooding and damage. Act quickly to remove water manually and get the pump fixed or replaced. Don't wait to see if it starts again.

Can I replace a sump pump myself?

Yes, if you are comfortable with basic plumbing and electrical work. Turn off the power at the breaker, disconnect the old pump, and install the new one following the manual. If you are unsure or the wiring looks complex, hire a plumber. Safety comes first.

What should I do if the sump pump pit overflows?

Shut off the power to the pump to prevent electrical hazards, then remove water with a wet/dry vacuum or bucket. Move items away from the water. If the water is contaminated, wear protective gear. After the water is out, dry the area and call the pros to assess damage.

Call Now (281) 688-9975