Phone answered 24/7 · Missouri City, TX and nearby communities

Call 24/7: (281) 688-9975
Brays Bayou Water ResponseWater Damage Help · Missouri City, TX

Water Damage to Laminate Flooring: What to Do Now

Last updated October 31, 2026

The short answer

First Steps After Water Exposure

Start by removing any standing water with towels or a wet vacuum. Blot, do not rub, to avoid pushing water deeper into the seams. Move furniture off the wet area to prevent stains and further damage.

Open windows and doors if weather allows, and place fans around the room to increase airflow. Use a dehumidifier to pull moisture from the air and the flooring. Remove baseboards or quarter round to let the edges dry, as trapped moisture can cause the laminate to swell.

When to Replace vs. Dry

Laminate is made of pressed wood fibers that absorb water quickly. If the boards are only slightly damp and you act within a few hours, drying may save them. However, if the edges are swollen, the surface is bubbling, or the boards are lifting, replacement is often the only option.

Check for delamination by pressing on the surface. If it feels soft or spongy, the core is damaged. Even if the top looks fine, hidden moisture can lead to mold or further warping later. When in doubt, remove a small section to inspect the subfloor.

  • Blot up water immediately with clean towels
  • Run fans and a dehumidifier for at least 48 hours
  • Remove baseboards to expose edges
  • Lift a board to check the subfloor for moisture
  • If boards are swollen, mark them for replacement
  • Keep the room ventilated until fully dry

Drying and Dehumidifying

Set up fans to blow across the floor, not just into the room. Point them at the wet area to evaporate moisture. A dehumidifier helps pull water from the air, which speeds up the drying of the laminate and the subfloor beneath.

Keep the environment stable. Avoid sudden temperature changes, which can cause the laminate to expand or contract. Run the dehumidifier for several days, checking the floor regularly for any signs of swelling or buckling. In humid climates, drying can be slower, so extra time may be needed.

Handling Swollen or Buckled Boards

If you see boards lifting or buckling, do not try to sand them down while wet. Sanding can damage the surface finish and spread particles. Instead, remove the affected boards carefully, starting from the nearest wall or edge. This prevents further damage to adjacent boards.

Inspect the subfloor for moisture or mold. If the subfloor is wet, dry it thoroughly before installing new laminate. Use a moisture meter if you have one, or place a plastic sheet over the area for 24 hours to check for condensation. If the damage is extensive, local water damage pros can handle the removal and replacement.

When to Call the Pros

If water has soaked through to the subfloor or spread under walls, the damage may go beyond the flooring itself. Standing water can also lead to mold growth within 24 to 48 hours. A professional inspection can reveal hidden moisture and help you decide on the right course of action.

For large areas or if you are unsure about the extent of damage, contact a water damage inspection service. They can assess the flooring, subfloor, and surrounding structures. If removal is needed, water-damaged flooring removal services can take out the old laminate safely and prepare the area for new installation.

Need help right now?

Phones are answered 24/7 for Missouri City and nearby communities.

Call Now (281) 688-9975

Frequently asked questions

Can I dry laminate flooring with a hairdryer?

A hairdryer is not effective for large areas and can overheat the surface, causing more damage. Use fans and a dehumidifier instead. For small spills, blotting and air drying may be enough, but for larger water exposure, professional drying equipment is better.

How long does laminate take to dry after water damage?

Drying time varies based on the amount of water, humidity, and airflow. In good conditions, surface moisture may dry in a day or two, but subfloor moisture can take several days. Use a moisture meter to check if the subfloor is dry before replacing boards.

Will my insurance cover laminate floor replacement?

Policies vary, and your insurer decides what is covered. Water damage from sudden events like a burst pipe may be covered, while gradual leaks or flooding may not. Review your policy and contact your insurance company to discuss your specific situation.

Call Now (281) 688-9975