Phone answered 24/7 · Missouri City, TX and nearby communities

Call 24/7: (281) 688-9975
Brays Bayou Water ResponseWater Damage Help · Missouri City, TX

How to Board up Windows for a Hurricane Properly

Last updated October 31, 2026

The short answer

Measure and Cut the Plywood

Start by measuring each window you plan to cover. Measure the width and height of the window frame, then add 8 inches to each dimension. This extra overlap ensures the board covers the entire opening and anchors securely to the wall.

Use 5/8-inch exterior-grade plywood for the strongest protection. Have the lumber yard cut the panels to size if you do not have a saw. Label each panel with the window it belongs to, so installation is quick when the storm is near.

Mark the Anchor Points

Before the storm, hold each panel over its window and mark where you will drill pilot holes. Use a pencil to mark the plywood at each corner and along the edges, about 2 inches from the edge. These marks guide your drill and keep screws from splitting the wood.

For brick or stucco walls, you need masonry anchors. For wood siding, use exterior wood screws that are at least 3 inches long. Pre-drill the holes in the plywood to make installation faster when you are in a hurry.

  • Measure window width and height, then add 8 inches to each
  • Use 5/8-inch exterior-grade plywood
  • Label each panel for its specific window
  • Pre-drill pilot holes 2 inches from the board edges
  • Choose screws long enough to bite into the wall frame
  • Store boards and screws in a dry, accessible spot

Install the Boards Securely

When the storm warning is issued, install the boards from the outside. Hold the panel in place, then drive screws through the pre-drilled holes into the wall. Use a drill or screwdriver with a clutch to avoid stripping the screw heads. Place screws at each corner and every 12 inches along the edges.

For extra strength, use hurricane clips or brackets designed for window shutters. These metal fasteners hold the board tighter than screws alone. If you use clips, attach them to the wall first, then slide the board into place and lock it down.

Seal the Edges and Gaps

After the board is attached, seal the edges with waterproof tape or a bead of exterior caulk. This keeps wind-driven rain from seeping between the board and the wall. Pay extra attention to the top edge, where water tends to run down.

Check the seal after the first heavy rain. If you see water stains on the interior wall, you may need to reapply tape or caulk. Even a small gap can let water in, leading to drywall damage or mold. If water does get inside, a water damage inspection can help you find the source.

After the Storm Passes

Once the hurricane threat is over, remove the boards carefully. Unscrew the panels and store them flat in a dry area. Check the window frames and walls for any damage, such as cracked glass, bent frames, or water stains. Address these issues before the next storm season.

If you find water damage around the windows or walls, you may need professional help. Local water damage pros can assess the extent and dry out the structure. They can also help with window replacement if the frames are rotted or warped from moisture.

  • Remove boards and store them flat and dry
  • Inspect frames for cracks or rot
  • Check for water stains on interior walls
  • Dry any wet areas within 48 hours
  • Consider window replacement if frames are damaged

Need help right now?

Phones are answered 24/7 for Missouri City and nearby communities.

Call Now (281) 688-9975

Frequently asked questions

What type of plywood should I use for boarding windows?

Use 5/8-inch exterior-grade plywood, often called CDX. It is thicker and more water-resistant than thinner panels. Avoid particle board or OSB, which can swell and fall apart when wet.

Can I board windows from inside the house?

Inside installation is less secure because the wind pushes the board against the glass, and screws may pull out. Outside installation is the proper method, as the board takes the pressure directly.

How do I know if my windows need replacement after a hurricane?

Look for cracked glass, broken seals, or water stains on the interior. If the frame is rotted or warped, replacement may be necessary. A water damage inspection can help you decide.

Call Now (281) 688-9975